JHWL INDUSTRIAL

Products

Product supply and selection support for industrial drives, electrohydraulics, conveyor protection and bulk-material weighing.

Our Product Lines

SIMO · Motors & Electrical Controls

SIMO

Motors & Electrical Controls

New equipment, motor replacement and electrical controls

  • Low- & High-voltage Motors
  • Permanent Magnet & Explosion-proof Motors
  • Variable Frequency Drives, Soft Starters & Control Equipment
View product directions
Brand background

Chinese industrial motor manufacturer established in 1955

Backed by seven decades of manufacturing experience, SIMO offers low- and high-voltage, permanent magnet, and explosion-proof motors alongside matching electrical controls. For new installations and retrofits, we help align operating conditions, efficiency targets, and budget to select the right drive configuration.

Matsushima conveyor protection equipment (left)Matsushima conveyor protection equipment (right)

Matsushima (Shanghai Dahong Matsushima)

Conveyor Protection

Conveyor emergency stops, belt alignment and operating monitoring

  • Pull-rope & Belt Misalignment Switches
  • Speed & Belt Slip Monitoring
  • Chute Blockage & Belt Tear Detection
View product directions
Brand background

Conveyor protection specialist backed by Japanese sensing technology

Built on Matsushima’s industrial sensing expertise in Japan and extensive international project experience, the range covers pull-rope emergency stop, belt misalignment, speed and slip, chute blockage, and belt tear detection. We help configure protection devices and monitoring points around your conveyor layout and site conditions.

Shanghai Yamato · Electronic Belt Scales

Shanghai Yamato

Electronic Belt Scales

Continuous bulk weighing, flow monitoring and cumulative measurement

  • Continuous Bulk Weighing
  • Material Flow Rate Monitoring
  • Total Conveyed Weight Measurement
View product directions
Brand background

Japanese weighing technology backed by decades of industrial application in China

Shanghai Yamato combines Japanese Yamato weighing technology with over 30 years of industrial application experience in China, supplying belt scales for continuous flow monitoring and total weight measurement. We help evaluate accuracy targets, material characteristics, conveyor conditions, and budget to configure reliable weighing solutions for production management.

Atos · Electrohydraulic Components & Hydraulic Systems

Atos

Electrohydraulic Components & Hydraulic Systems

Direction, pressure, flow and actuator control for hydraulic equipment

  • Proportional and servoproportional valves with control electronics
  • On-off, cartridge and conventional hydraulic valves
  • Pumps, cylinders and hydraulic system configurations
View product directions
Brand background

An Italian specialist in electrohydraulics

Atos specializes in electrohydraulics, with a portfolio spanning proportional and servoproportional valves, on-off valves, control electronics, pumps, cylinders and hydraulic systems. For equipment integration and component replacement, we support selection by reviewing pressure, flow, control requirements and mounting interfaces, then checking compatibility with the hydraulic circuit.

Explore the equipment on a conveyor

Explore equipment locations, or compare belt-misalignment risks with a protective response.

Bulk material conveyingApplication schematic
Bulk conveyor with a drive motor, belt sway switch, pull-rope switch and a belt scale beneath the carrying belt.

General application only. Configuration depends on site conditions.

01 / 04Drive end

Drive motor

SIMO

Drive motor
Motor category reference; model depends on duty

Drives the conveyor belt. Coupling and transmission arrangements depend on the load and site conditions.

For selectionLoad torque, belt speed, existing model and installation conditions.

View related products
02 / 04Belt-edge sensing

Two-stage belt sway switch

Matsushima

Two-stage belt sway switch
Belt sway switch product reference

Detects belt misalignment and provides separate inputs for warning and shutdown interlocks.

For selectionBelt width, mounting position, signals and operating environment.

View related products
03 / 04Local operation

Bidirectional pull-rope switch

Matsushima

Bidirectional pull-rope switch
Pull-rope switch product reference

Provides local emergency-stop points along the conveyor. Pulling the rope sends an emergency-stop signal.

For selectionAccess routes, rope layout, contacts and reset requirements.

View related products
04 / 04Material weighing

Electronic belt scale

Shanghai Yamato

Electronic belt scale
Weighing-zone schematic; frame depends on model

Measures material flow rate and total conveyed mass during continuous conveying.

For selectionMaterial properties, belt width, speed and installation conditions.

View related products

When a belt drifts, how does protection respond?

Start with the same belt deviation. Follow the developing risk and see how detection signals lead to a protective response.

Same viewpoint · Schematic scaleDemo paused
Bulk conveyor with a belt-edge contact roller for misalignment detection
Focus: belt edge and contact roller

Stage 01 / 05

Centered belt, normal travel

The contact roller sits beside the belt edge. The centered belt has not reached an actuation condition.

Detection & signal
No actuation condition reached
Conveyor condition
Normal travel

The switch provides detection signals. A correctly connected, responsive control circuit carries out the stop. The switch does not realign the belt.

Reading this demonstration

Both views start with the same cause of drift. The risk view assumes no feedback from this particular detector and no timely intervention; other protections may still exist.

The switch provides detection signals. A correctly connected, responsive control circuit carries out the stop. The switch does not realign the belt.

The animation shows the sequence of belt sway detection and shutdown. Actual response time and stopping distance depend on the conveyor and its control system.

Read the full sequence

Risk development

  1. Centered belt, normal travel

    Observe the starting position. Clearance remains between the belt and frame as material travels along the conveyor.

  2. The belt begins to drift

    The abnormal starting point matches the protective view. A missing switch does not cause drift; this comparison shows what follows it.

  3. Deviation grows without intervention

    The belt edge moves farther from its normal position. Without this detection feedback or timely intervention, the condition continues.

  4. Continued drift approaches the frame

    Without this detection interlock or timely intervention, the belt keeps travelling and approaches the frame.

  5. Greater risk of rubbing and spillage

    Continuing deviation may cause belt-edge rubbing or spillage. The illustration holds at a small spill so you can compare the outcomes.

Protective response

  1. Centered belt, normal travel

    The contact roller sits beside the belt edge. The centered belt has not reached an actuation condition.

  2. The same drift approaches the roller

    The belt deviates in the same direction, bringing its edge closer to the contact roller. Observe the changing position.

  3. Belt contact produces a warning

    As deviation increases, the belt pushes the contact roller. A warning signal is issued when the relevant actuation condition is reached.

  4. Further drift produces a stop signal

    If deviation continues to the second actuation condition, the switch issues a stop-interlock signal. The control circuit must act on it.

  5. Control response slows the belt to a stop

    Assuming the control circuit is correctly connected and responds, the conveyor stops. The cause of drift still needs investigation; the belt does not realign itself.

Prepare for Product Selection

Custom options are available for selected products. Tell us about your application, target specifications and installation conditions so we can confirm which models and configurations are available. Expand a checklist below and share the details you have.

SIMO

Motors & Electrical Controls
  • Equipment Application & Existing Model
  • Power, Voltage & Speed Requirements
  • Installation Environment & Control Requirements
View Selection Checklist

Matsushima

Conveyor Protection
  • Protection Needs & Detection Targets
  • Conveyor Conditions & Installation Location
  • Site Environment & Signal Requirements
View Selection Checklist

Shanghai Yamato

Electronic Belt Scales
  • Material Characteristics & Required Throughput
  • Belt Width, Belt Speed & Installation Conditions
  • Weighing Application & Accuracy Requirements
View Selection Checklist

Atos

Electrohydraulic Components & Hydraulic Systems
  • Equipment application, existing model and hydraulic circuit diagram
  • Pressure, flow and control objectives
  • Mounting interfaces, hydraulic fluid and operating environment
View Selection Checklist

Not sure where to start? Tell us about your equipment application or purchasing needs, and we can help identify the information needed.

Share what you know; missing details can be clarified during further discussions.

Discuss Product Selection

Privacy Notice

Enquiry details are not sent and are kept only on this page. They may be lost when you reload or leave.

This page does not save enquiry details in browser storage or send them to other services.